3in1 MIG /TIG/MMA Babban Mitar Semi-atomatik

Babban abin da muka fi mayar da hankali a kai shi ne samar da ingantaccen walda na MMA, walda MIG, waldar TIG, MMA, wato, walƙiya na ƙarfe na hannu, wanda shine sanannen tsarin walda wanda ya haɗa da amfani da na'urori masu rufaffiyar ruwa don samar da haɗin gwiwa mai ƙarfi tsakanin sassan ƙarfe. . MIG ko karfe inert gas kariya walda ne mai amfani ci gaba da waldi waya da kuma kariya gas don samar da high quality welds. Sun dace da abubuwa daban-daban, irin su carbon karfe, bakin karfe da aluminum.

Baya ga MMA da MIG waldi, muna kuma mai da hankali kan injunan walda na TIG. TIG ko tungsten musamman inert gas kariya walda wata ci-gaba fasahar walda cewa iya samar da high quality welds da sarrafa zafi shigar da kyau. An ƙera injin ɗin mu na argon baka don aikace-aikacen walda daidai, gami da sararin samaniya, kera motoci da masana'antu.

1: Duba dabaran isar da waya, fara saukar da maballin, ɗaga ƙafafun matsi, sannan cire harsashi. Dabarar ciyarwar waya a ciki tana da ramummuka biyu, 0.8 da 1.0. Shigar da waya walda 1.0, fitar da fuska 1.0, shigar da wayar walda 0.8, sannan 0.8 fuska waje.

2: Saka wayar walda a cikin tiren waya kuma cire sukurori. Zazzage sassan da ke ciki, sai a ajiye wayar walda, a ajiye tiren walda, kuma kar a sanya wayar a sama. Bayan an fitar da shi, sai a sanya sashin farko, sannan a sanya magudanar ruwa, sannan a sanya takardar karfe a wurin.

A ƙarshe, ɗauki dunƙule kuma ku murɗa shi sau uku. Kar a danne shi da yawa, ta yadda farantin waya za ta iya motsawa gaba daya.

Bayan haka, sai a daidaita wayar walda, ku wuce wayar walda daga kasa, ku wuce ta hanyar ciyar da wayar, sannan ku wuce wayar da baya. Bayan wayar walda ta fito daga gaba, danna maɓallin matsa lamba, ɗaga maɓallin, kuma an gama shigar da wayar walda.

3: Fitar da bindigar walda a sanya wayar walda ta cikin walda. A tsakiyar bindigar, sanya bindigar walda da murɗa shi, sannan ku haɗa kebul na juyawa a sama.

Na gaba, shigar da wayar ƙasa, daidaita aikin zuwa MIG, ɗaure maɓallin waldawa, sannan fara juya wayar walda. Lokacin da aka aika da wayar walda zuwa ga muzzle, wayar walda ta fito.

4: Sai a dora wayar kasa, a dauko bindigar walda, sai a sanya wayar a tsakiya, sannan a ja abin da zai yi walda.

5: Hakanan ana iya amfani da MMA, kuma ana iya amfani da walda ta tabo. Ana iya canza aikin zuwa MMA tare da dannawa ɗaya, kuma ana iya amfani da hannun walda na hannu. Ana iya amfani da sandunan walda 3.2 da sandunan walda 2.5, kuma ana iya amfani da walda tabo. Hakanan zaka iya amfani da TIG, kuma aikin zai iya canzawa zuwa TIG tare da dannawa ɗaya.